View PS2861B-1Y-V-F3A_663908.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1. anode 2. cathode 3. emitter 4. collector pin connection (top view) 43 12 the mark ? shows major revised points. the revised points can be easily searched by copying an " ? " in the pdf file and specifying it in the "find what:" field. description the ps2861b-1 is an optically coupl ed isolator containing a gaas li ght emitting diode and an npn silicon phototransistor. the package has a shield effect to cut off ambient ligh t, and is mounted in a shrink sop (small outline package) for high density applications. due to the high isolation voltage bet ween the input and output, the ps2861b-1 is suitable for interface and signal transfer circuits that require surface or high-density mounting. features ? operating ambient temperature: 110 c ? isolation distance (0.4 mm min.) ? high isolation voltage (bv = 3 750 vr.m.s.) ? shrink sop (small outline package) type ? high-speed switching (t r = 4 s typ., t f = 5 s typ.) ? embossed tape product: ps2861b-1-f3: 3 500 pcs/reel ? pb-free product ? safety standards ? ul approved: no. e72422 ? csa approved: no. ca 101391 (ca5a, can/csa-c22.2 60065, 60950) ? bsi approved: no. 8979/8980 ? semko approved: no. 908508 ? din en60747-5-2 (vde0884 part2) approved: no. 40024453 (option) applications ? power supply ? programmable logic controllers ? ? photocoupler ps2861b-1 4-pin ssop photocoupler operating ambient temperature 110 c ? nepoc series ? document no. pn10742ej02v0ds (2nd edition) date published march 2010 ns
package dimensions (unit : mm) m 0.12 0.40.1 1.27 2.70.3 4.4 7.00.3 0.50.3 0.15 +0.10 ?0.05 2.0 0.1 0.10.1 1 2 4 3 photocoupler construction parameter unit (min.) air distance 5.0 mm creepage distance 5.0 mm isolation distance 0.4 mm marking example 031 year assembled (last 1 digit) week assembled assembly lot last number of type number: 1b n1b an initial of "nec" *1 *1 bar: pb-free and halogen free 031 data sheet pn10742ej02v0ds 2 ps2861b-1 ?
ordering information part number order number solder plating specification etc. packing style safety standard approval application part number *1 ps2861b-1 ps2861b-1y-a pb-free and magazine case 100 pcs standard products ps2861b-1 ps2861b-1-f3 ps2861b-1y-f3-a halogen free embossed tape 3 500 pcs/reel (ul, csa, bsi, semko approved) ps2861b-1-v ps2861b-1y-v-a m agazine case 100 pcs din en60747-5-2 ps2861b-1-v-f3 ps 2861b-1y-v-f3-a embossed t ape 3 500 pcs/reel (vde0884 part2) approved (option) *1 for the application of the safety st andard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current (dc) i f 50 ma reverse voltage v r 6 v power dissipation derating p d / c 0.6 mw/ c power dissipation p d 60 mw peak forward current1 *1 i fp 1 2.5 a peak forward current2 *2 i fp 2 1.0 transistor collector to emitter voltage v ceo 70 v emitter to collector voltage v eco 5 v collector current i c 50 ma power dissipation derating p c / c 1.2 mw/ c power dissipation p c 120 mw isolation voltage *3 bv 3 750 vr.m.s. operating ambient temperature t a ?55 to +110 c storage temperature t stg ?55 to +150 c *1 pw = 10 s, duty cycle = 1% *2 pw = 100 s, duty cycle = 1% *3 ac voltage for 1 minute at t a = 25c, rh = 60% between input and output. pins 1-2 shorted together , 3-4 shorted together. data sheet pn10742ej02v0ds 3 ps2861b-1 ?
electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 5 ma 1.1 1.4 v reverse current i r v r = 5 v 5 a terminal capacitance c t v = 0 v, f = 1 mhz 15 pf transistor collector to emitter dark current i ceo i f = 0 ma, v ce = 24 v 100 na i f = 5 ma, v ce = 5 v 50 150 300 % coupled current transfer ratio (i c /i f ) *1 ctr i f = 1 ma, v ce = 5 v 10 50 collector saturation voltage v ce (sat) i f = 10 ma, i c = 2 ma 0.3 v isolation resistance r i-o v i-o = 1 kv dc 10 11 isolation capacitance c i-o v = 0 v, f = 1 mhz 0.4 pf rise time *2 t r v cc = 5 v, i c = 2 ma, r l = 100 4 s fall time *2 t f 5 *1 ctr rank ctr rank ctr (%) conditions 100 to 300 i f = 5 ma, v ce = 5 v l 20 and larger i f = 1 ma, v ce = 5 v 50 to 150 i f = 5 ma, v ce = 5 v m 10 and larger i f = 1 ma, v ce = 5 v 50 to 300 i f = 5 ma, v ce = 5 v n 10 and larger i f = 1 ma, v ce = 5 v *2 test circuit for switching time input output 90% 10% tr td tf ts ton toff v cc v out i f r l = 100 50 pulse input in monitor pw = 100 s duty cycle = 1/10 data sheet pn10742ej02v0ds 4 ps2861b-1
typical characteristics (t a = 25c, unless otherwise specified) 100 80 60 40 20 0 25 50 75 100 150 125 30 25 20 15 10 5 0 1 23 456 789 10 0.6 mw/c i f = 10 ma 5 ma 3 ma 2 ma 1 ma ambient temperature t a (c) diode power dissipation p d (mw) diode power dissipation vs. ambient temperature ambient temperature t a (c) transistor power dissipation p c (mw) transistor power dissipation vs. ambient temperature collector to emitter voltage v ce (v) collector current i c (ma) collector current vs. collector to emitter voltage ambient temperature t a (c) collector to emitter dark current vs. ambient temperature collector to emitter dark current i ceo (na) collector saturation voltage v ce (sat) (v) collector current i c (ma) collector current vs. collector saturation voltage 0 20 40 60 120 100 80 110 200 180 160 140 120 100 80 60 40 20 0 25 50 75 100 125 1.2 mw/ 150 c 110 10 000 0.1 100 1 000 10 1 v ce = 24 v 100 1.51.41.31.21.11.00.90.80.7 50 10 5 1 0.5 0.1 0c ?25c ?55c +60c +25c t a = +100c 0.05 forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage 0.1 1.0 10.0 100.0 2 ma 3 ma 1 ma 5 ma i f = 10 ma 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 remark the graphs indicate nominal characteristics. data sheet pn10742ej02v0ds 5 ps2861b-1 ?
1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 ? 40 ?60 ? 20 020 60 40 120 80 100 100 10 1 0.1 10 100 1 000 10 000 0.1 1 10 i f = 5 ma, v cc = 5 v, ctr = 100% 100 r l = 1 k 300 100 i f = 5 ma, v ce = 5 v 5 0 ? 5 ? 10 ? 15 ? 20 ? 25 0.1 1 10 100 1 000 ambient temperature t a ( c) normalized current transfer ratio vs. ambient temperature normalized current transfer ratio ctr normalized to 1.0 at t a = 25 c, i f = 1 ma, v ce = 5 v load resistance r l () switching time vs. load resistance switching time t ( s) load resistance r l (k) switching time vs. load resistance switching time t ( s) frequency f (khz) normalized gain g v frequency response normalized to 1.0 at t a = 25 c, i f = 5 ma, v ce = 5 v 300 250 200 150 100 50 0 v ce = 5 v, n = 3 forward current i f (ma) current transfer ratio ctr (%) current transfer ratio vs. forward current 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 ? 40 ?60 ? 20 020 60 40 80 100 ambient temperature t a ( c) normalized current transfer ratio vs. ambient temperature normalized current transfer ratio ctr 120 t f t r t s i c = 2 ma, v cc = 5 v, ctr = 100% t d 0.1 1 10 100 0.1 1 10 100 1 000 ctr = 160%@t a = 25c ctr = 160%@t a = 25c t s t f t d t r sample a b c 100%@t a = 25c 100%@t a = 25c remark the graphs indicate nominal characteristics. data sheet pn10742ej02v0ds 6 ps2861b-1
taping specifications (unit : mm) outline and dimensions (reel) packing: 3 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 outline and dimensions (tape) 1.550.1 4.00.1 2.00.1 4.00.1 1.750.1 2.8 max. 7.550.1 0.3 7.50.1 16.00.3 2.850.1 2.30.1 1.5 +0.1 ?0 3302.0 1001.0 2.00.5 15.9 to 19.4 outer edge of flange 21.51.0 17.51.0 tape direction ps2861b-1-f3 n1b 031 n1b 031 n1b 031 n1b 031 n1b 031 data sheet pn10742ej02v0ds 7 ps2861b-1
recommended mount pad dimensions (unit: mm) 1.45 0.8 1.27 6.25 remark all dimensions in this figur e must be evaluated before use. data sheet pn10742ej02v0ds 8 ps2861b-1
notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 12030 s (preheating) 220c 180c package surface temperature t (c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260c max. 120c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (l ead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead. (b) please be sure that the temperatur e of the package woul d not be heated over 100 c. data sheet pn10742ej02v0ds 9 ps2861b-1
(4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly bet ween the photocoupler?s i nput and output or between corrector-emitters at startup, the output transistor may enter the on state, even if the voltage is wi thin the absolute maximum ratings. 3. measurement conditions of current transfer ra tios (ctr), which differ according to photocoupler check the setting values before use, since the forward current conditions at ctr measurement differ according to product. when using products other than at the specified forward current, the char acteristics curves may differ from the standard curves due to ctr value variations or the like. theref ore, check the characte ristics under the actual operating conditions and thoroughly take variations or the like into cons ideration before use. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high te mperature and high humidity. data sheet pn10742ej02v0ds 10 ps2861b-1
specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068-1/din en 60068-1) 55/110/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.5 u iorm , p d < 5 pc u iorm u pr 710 1 065 v peak v peak test voltage (partial discharge te st, procedure b for all devices) u pr = 1.875 u iorm , p d < 5 pc u pr 1 331 v peak highest permissible overvoltage u tr 6 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (iec 60112/din en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664-1 vde0110 part 1) iii a storage temperature range t stg ?55 to +150 c operating temperature range t a ?55 to +110 c isolation resistance, minimum value v io = 500 v dc at t a = 25 c v io = 500 v dc at t a max. at least 100c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum permi ssible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 175 400 700 10 9 c ma mw data sheet pn10742ej02v0ds 11 ps2861b-1 ?
the information in this document is current as of march, 2010. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. in addition, nec electronics products are not taken measures to prevent radioactive rays in the product design. when customers use nec electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of nec electronics products. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e0904e (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific": data sheet pn10742ej02v0ds 12 ps2861b-1
caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth. ps2861b-1

▲Up To Search▲

Price & Availability of PS2861B-1Y-V-F3A

	To Download PS2861B-1Y-V-F3A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .